Flat Wire Rolling Mill Speed Up to 650m/min

A brand CRM flat wire rolling mill capable of reaching speeds up to 650 m/min is engineered to meet the demands of high-volume production while maintaining high-quality standards. This type of flattening rolling mill is equipped with robust components and advanced control systems to handle the rapid processing speeds.

Send email to us

Product Detail

Video

Product Tags

Flat Wire Rolling Mill Speed Up to 650m/min

Material grade: Stainless steel, copper wire, carbon steel, precious metals, aluminum alloy, titanium wire, niobium titanium(a videos show you how the flat wire rolling mill work)

Brand: CRM

Overview

Flat Wire Rolling Mill Speed Up to 650m/min.jpg

Features

In comparison to the usual 2-high wire rolling machines, CRM's 2-high Flat wire rolling mill machines have higher stiffness and result in higher precision flat wire.

Cold rolling machine Process parameters

1. The linear rolling speed at the exit of the finished profile should be up to 650 m/min during stable oper-ation.

2. The tooling supplied with the machine should conform to the drawings attached to the Specification.

Flat Wire Rolling Mill Speed Up to 650m/min.jpg

Technical Description of CRM Flat Wire Rolling Mill

1. Wire rod coils are installed on a vertical two-position pay-off device.

2. The wire rod passes through the cleaning unit equipped with orbital metal wire brushes.

3. For semi-finished strips, the horizontal pay-off device is used.

4. A speed compensator (dancer) is installed in front of the entrance to each stand so that the operation of the pay-off device and that of the rolling stands of the machine are synchronized.

5. The washing and drying units should ensure the complete removal of residual cooling and lubrication fluid from the strip and thus provide a perfectly clean surface at the exit from the Flat wire cold rolling machine.

6. The geometry control unit should adjust Stand No.4 is any deviation from the specified parameters occurs.

7. The bottom of the internal machine tank should be inclined (go at an angle) to facilitate the removal of dirt when the cooling and lubrication fluid is replaced. The incline (angle) ensures that the cooling and lubrication fluid and dirt run down to the same place.

8. The horizontal take-up device should ensure the precision laying of the strip and be capable of making products with an inner coil diameter of 400 mm, 600 mm.

How Else Can We Help You?

Wire Flattening And Shaping Lines Machine For Flattening Copper Wire Wire Shaping Lines For Carbon Steel Wires Flat Wire Rolling Mill Copper And Aluminum Flat Wire Drawing Machine PV Ribbon Machine With Tin Coating Lines Micro Rolling Cassettes Titanium Alloy Wire Drawing Machine Profile Wire Rolling Lines For Piston Rings Copper Strip Rolling Mill Ultra Precision Rolling Mills Flat Magnet Wire Equipment Straight wire drawing machine Copper And Aluminum Flat Wire Drawing Machine