Copper And Aluminum Flat Wire Drawing Machine

Copper and aluminum wire drawing machine

Brand: CRM
Uses: Used for drawing and rolling aluminum and copper flat wires, rectangular wires, fan-shaped wires and tram wires of various specifications. The flat wire drawing machine is a device for rolling or drawing round wire into flat wire. Rolling, oiling, rewinding and feeding wires are completed at one time. The equipment is combined with two-roller and four-roller flat wire equipment and precision wire drawing machine. Stable operation, small rounded corners on the edge of the rectangular flat wire, high precision in wide variable size, hydraulic motor control for winding, neat winding, etc.

Send email to us

Product Detail

Video

Product Tags

Copper and aluminum flat wire drawing machine

Copper and aluminum rectangular wire drawing machine

Precision wire drawing machine

Copper and aluminum wire drawing machine

Brand: CRM

Uses: Used for drawing and rolling aluminum and copper flat wires, rectangular wires, fan-shaped wires and tram wires of various specifications. The flat wire drawing machine is a device for rolling or drawing round wire into flat wire. Rolling, oiling, rewinding and feeding wires are completed at one time. The equipment is combined with two-roller and four-roller flat wire equipment and precision wire drawing machine. Stable operation, small rounded corners on the edge of the rectangular flat wire, high precision in wide variable size, hydraulic motor control for winding, neat winding, etc.

Composition of the Copper and aluminum flat wire drawing machine line

Pay-off unit →active flattening machine →tension controller →drawing machine →precision take-up →cassette roller dies from rolling mill /rolling head →CRM-9/400 nine-wire drawing machine

拉丝机.png

Features of Copper and Aluminum Rectangular Wire Drawing Machine:

1. The main transmission adopts the combination of frequency conversion speed regulation and hard tooth surface reducer, which has no impact when starting and wide speed regulation range.

2. The flattening machine and the wire-drawing machine adopt advanced linkage speed control device, which greatly improves the operability of the whole wire-drawing unit.

3. The wire-separating wheel device of the outlet drum effectively improves the surface quality of the finished line.

4. Low energy consumption and high efficiency: Since the unit adopts a frequency conversion speed regulation control system, it saves 10-30% of electricity compared with the traditional sliding wire drawing unit, and improves the efficiency by about 60% for drawing large-size wires.

5. Anti-rust, all parts of this production are painted or galvanized

6. High precision, width and thickness tolerance: +-0.001mm

7. This equipment adopts the design method of rolling and pulling apart, and the range of incoming products is more flexible

8. pay-off and take-up unit, The overhead recoil should be designed to work with wires with a diameter of 3.00 to 14.00 mm made of copper or Aluminum wire. Coils of wire can be placed on pallets, on trolleys, in boxes or in barrels. The coils are suitable for the annealing process; The flange oscillation should not exceed 25% of the wire width.

9. Wire tension control system--The tension control system consist of at least 5 rollers to ensure accurate speed synchronization; The precision rolls be made of polyimide to reduce the risk of surface damage to the wire; The tension control system in the rolling area should be able to cool the wire after the rolling and drawing process.

铜扁丝 (2).png

Components of the Production Line of Copper and Aluminum Rectangular Wire

Pay-off device: coil passive pay-off or gantry pay-off device (selected by the customer)

Active flattening machine: drive power 30kw, roll diameter 300mm, line speed 100m/min

Wire drawing machine: drive power 90kw, diameter of incoming rod 10mm, diameter of wire drawing drum 475mm, wire specification 5-30mm2, wire speed 160m/min

Wire take-up machine: self-propelled wire take-up machine, take-up reel specifications PN710-PN800, CRM500/5C five-die wire drawing unit

Pay-off device: coil passive pay-off or gantry pay-off device (selected by the customer)

Active flattening machine: drive power 30kw, line speed 100m/min

Wire drawing machine: drive power 55kw, diameter of incoming rod 8mm, specification of output wire 5-30mm2, outgoing wire speed 160m/min

Wire take-up machine: self-propelled wire take-up machine, take-up reel specification PN710-PN800

About the company

Sky Bluer Environmental Technology Co., Ltd. is a manufacturer specialized in precision cold rolling mills and systems for metal flattening and shaping. These include micro precision cold rolling mills, rolling cassettes, flat and profile wire drawing machine, Turk heads universal rolling mills, and precision rollers. We have independently R&D rectangular spring wire lines, flat wire rolling mill, volute spiral spring continuous rolling line, valve spring rolling mill, and triangular wire rolling mill. These are designed to replace brands Europe/USA/Japan cold rolling mills.