PV Round And Flat Wire Machine Leading the Solar Photovoltaic Industry
PV Round And Flat Wire Machine Leading the Solar Photovoltaic Industry
PV Round And Flat Wire Machine
Brand: CRM
Round wire | Min | Max | Remarks |
Sizes produced in (Bare Diameter) | Dia 0.200mm mm | Dia 0.500 mm | Input Bare size |
Coating thickness | 15 microns | 25 microns | minimum to maximum coating requirements |
Coating accuracy | 0.004 mm | 0.004 mm | ± 0.004 mm of the Nominal diameter |
Covered Diameter Tolerance | 0.008 mm | 0.008 mm | ± 0.008 mm of the Nominal diameter |
Line speed | 300 to 350 Mts/Min | NA | Required to run Dia 0.200 to 0.400 mm bare size with uniform coating 0.015 to 0.020mm |
FLAT RIBBONS | Min | Max | Remarks |
Bare copper size Width | 0.5mm | 1.5mm | ± 0.020 mm of Nominal width |
Bare copper Thickness | 0.150 | 0.300mm | ± 0.003mm of Nominal thickness |
Coating thickness /side | 15 microns | 30 Micron | ± 0.004mm of Nominal thickness |
Line speed | 200M/minutes | NA | |
Input Copper Type | C11000, Cu- ETP1 grade copper / C10200 OFC Copper / As per ASTM B49 1992 / EN 1977 | ||
Alloy Coating Type | Sn60Pb40, Sn62Pb36Ag2 and Sn96.5Ag3.5, Sn42Bi57Ag1 | ||
Coating quality | Uniform coating with good adhesion to bare copper with 100%coverage | ||
Covered diameter Concentricity | When finished diameter is measured, the measured values should not be more than 5 microns of the nominal covered diameter measured by micrometer. | ||
Finished wire coating surface | The prduced wire must be smooth without any burs, lumps, oxides, prickles, and discoloration | ||
Elongation % | The Elongation % must be > 25 % | ||
Yield strength | The yield strength has to be < 65 N/mm2 on the covered diameter | ||
Tensile Strength | 150 to 260 N/mm2 | ||
Pay Off spool type | Din 500 / DIN400/DIN 300 | ||
Take up spool Type | 10S ,DIN 160and HKV160 | ||
PV Round And Flat Wire Machine: Revolutionizing Solar Panel Manufacturing
PV Round And Flat Wire Machine stands out as one of the most influential advancements in solar panel manufacturing in the ever-evolving landscape of renewable energy.
A cutting-edge machine with unparalleled precision and flexibility, this machine streamlines the production process. Solar panels can be customized according to specific project requirements because it can handle both round and flat wire with equal proficiency. In any setting, the PV Round And Flat Wire Machine performs optimally, whether it is a rooftop installation or a large-scale solar farm.
The advanced automation capabilities of this machine make it possible for it to operate continuously without human intervention, maximizing output and minimizing labor costs at the same time. By doing so, production timelines are accelerated as well as overall efficiency is improved, making solar energy more accessible and more affordable to consumers throughout the world.
As an eco-conscious industry, the PV Round And Flat Wire Machine aligns seamlessly with the eco-conscious ethos of the solar industry by optimizing material usage and reducing waste. It enables manufacturers to position themselves as leaders in environmental stewardship as sustainability becomes increasingly central to consumer preferences.
Therefore, the PV Round And Flat Wire Machine represents an important advance in solar panel manufacturing. Through its innovative design, efficiency, and sustainability, it is a cornerstone of the renewable energy revolution, helping us move closer to a greener, more sustainable future.
Contact Us Today
Email:[email protected]
Mobile/Whatsapp:+86 13861313954
Website: https://precision-rolls.com/Products/
Leave Your Message
-
Photovoltaic Busbar Production Line
-
Nitinol Wire Drawing Machine with Best Performance
-
Straight Line Wire Drawing Machine Your Supplier In China
-
Precision Rolling Mills For The Precious Metals Industry
-
Straightening and Cutting Machine
-
Wire Reducing Machine
-
Titanium Clad Aluminum Strip Production Lines
-
Machine for Flattening Copper Wire