A precision high carbon steel flat wire rolling mill present in small sized rolling mill The dimensions produced by a given size of the high carbon wire will be reliant on the respective capacities possessed by flatter and roller mills. These small precision wire rolling mills usually produce flat wire in the following typical ranges:

1.Thickness/Width - From approxoimately 0.5mm up to about +50 mm

2. Thickness: Between approx 0.1 mm (0.004 in) and about 5 mm (0.2 in).

The small flat wire rolling mill works to tight tolerances, often working within ±0.01 mm (±0.0004 in) or better depending on the specific type of mill and the final item's quality needs.

Below is a picture showing details of our precision rolling mill