What technical documents can we provide to customers when they purchase our wire flattening and shaping equipment ?

1. Technical data sheet for the machine, containing its serial number, year of manufacture, intended use, specifications and operation and maintenance instructions.

2. Foundation specification.

3. Layout drawing.

4. Cable list.

5. Pneumatic and hydraulic diagrams.

6. Lubrication instructions.

7. Detailed specification for all the materials necessary to ensure normal operation of the machine; detailed specification for the electrical equipment.

8. Machine operation and maintenance manual.

9. Operation manual for the electrical equipment.

10. Assembly drawing for the main units.

11. Installation drawings for the main components with a parts list as well as a list of wear parts and their identification drawings.

12. List of motors and electrical components, all documentation for the electrical components.

13. Circuit drawings and wiring diagrams, cable lists.

14. Instructions for the setup, check and, if necessary, calibration of all digital indicators.

15. Software packages necessary for maintenance.

16. Control program passwords (keys).

17. Certificates of quality and acceptance certificates.

18. Spare and wear parts lists containing the ID numbers and manufacturers of these parts.

19. Subcontractors'technical documentation for all the machine components being purchased.

About Company

Founded in 2016, Sky Bluer Environmental Technology Co., Ltd. manufactures a variety shapes of industrial wire rolling lines, universal rolling mills, cold rolling cassettes, and precision rolls. As a replacement for cold rolling mills originating in Europe, America, and Japan, the company conducts independent research and development on rolling lines for spring steel square wire, flat wire, spring wire, shaped steel wire, wedge profile wire, and so forth. With the combination of modern technology and self-made rolling and drawing, the cost of grooving and the production of shaped wires can be greatly reduced. the rolled products are highly polished, with a straightness of up to 0.5mm/m, a thickness tolerance of less than 0.005mm, and a width tolerance less than 0.005mm.